TC SERIES  |  WINDOWS 7  |  SIGNCUT  |  FLEXI 10  |  ESPAÑOL  




TC SERIES DRIVER AND SETUP GUIDE
FOR WINDOWS 7




STEP 1: Download the Cutter Driver onto your computer.


 * * * * DOWNLOAD REQUIRED USB DRIVER * * * *



* * * * * * * * * * * * * * * * * * * * * * * * * * * *

STEP 2: Locate the file TC_Series Driver (ex. Desktop, My Documents, Downloads) double click to run, and extract.



STEP 3: The following screen is a Security Warning, press Run.



STEP 4: Press Extract. The file will be placed along with the TC_Series Driver.



STEP 5: The extracted TC_Series Driver folder will then appear.



STEP 6: Assuming that you already plugged the cutter via USB you need to access the Device Manager to access the Found New Hardware and install the driver.

To access Device Manager, use any of the following methods:

  • Start > Run > and type: devmgmt.msc
  • Start > Control Panel > Device Manager or System
  • Start > and do a Search for Device Manager or dev
  • Start > Control Panel > System and Security > System > Device Manager
  • Hold the Windows key + Pause Break > Device Manager
  • Right-click My Computer > Properties > Device Manager

STEP 7: Locate Other Devices and double click on CDC RS-232.



STEP 8: The CDC RS-232 properties will display. Select the Driver tab and press the Update Driver button.



STEP 9: The Found New Hardware will open, select Browse my computer for driver software and press Next.



STEP 10: Click the Browse button. Be sure to have the box next to “include subfolders”, checked.



STEP 11: Search and select the TC_Series Driver folder that was extracted in Step 5 and press OK.



STEP 12: Press Next.



STEP 13: The following message may appear during the driver installation, press Install this driver software anyway.



NOTE: Installing driver...



STEP 14: Once the driver has been successfully installed you will see the following screen with the COM number asigned. Press Close.



NOTE: The following message appears notifying that the driver was installed.



NOTE: After installing the driver, the Device Manager will display a new entry called: Ports (COM & LPT) and under that: Communications Port (COM?). The ? is the COM Port number. It is important to know the COM Number assigned to the cutter as this needs to match with your cutting software.

STEP 15: Open the Device Manager and check under Ports (COM & LPT).

To access Device Manager, use any of the following methods:

  • Start > Run > and type: devmgmt.msc
  • Start > Control Panel > Device Manager or System
  • Start > and do a Search for Device Manager or dev
  • Start > Control Panel > System and Security > System > Device Manager
  • Hold the Windows key + Pause Break > Device Manager
  • Right-click My Computer > Properties > Device Manager



STEP 16: Double click on Communications Port (COM?), click the Port Settings tab and change Bits per second to: 38400. Press OK.




* * * * * * * CUTTING SOFTWARE SETUP AND INSTALLATION * * * * * * *
CLICK THE ICON FOR THE SOFTWARE YOU ARE USING TO CONTINUE SETUP





IMPORTANT: If you have had any problems with this guide and need help or if you would just like to send us feed back on this guide please click the Live Support icon to enter into a chat with our support staff.


Enjoy your new vinyl cutter! Thank you for choosing USCutter