STEP 1: Insert the Flexi 10 Disc into your computer.

STEP 2: Choose the setup language and press OK.

STEP 3: The Welcome to the InstallShield Wizard for SAi Production Suite screen will appear, press Next.

STEP 4: Read the License Agreement, select I accept the terms of the license agreement and press Next.

STEP 5: Select the features and press Next.

STEP 6: Press Next.

NOTE: Installing...

IMPORTANT: Unplug the USB Dongle if you get this error message and press OK.

NOTE: Installing the USB Dongle driver...

STEP 7: Connect the USB Dongle and locate the password on a piece of paper included with the software package.

STEP 8: Enter the Password, and press Done.

IMPORTANT: If the password provided doesn’t work this error message will be displayed.

NOTE: Please contact us if the password provided doesn’t work.

STEP 9: Press OK.

STEP 10: Installation completed, press Finish.

NOTE: The following message will appear notifying that the USB Dongle drivers have been installed.


STEP 11: Open FlexiSTARTER 10 and press the Cut/Plot button. (Type some text or design something so this button becomes available).

NOTE: The Cut/Plot, the Production Manager and the Add Setup screens will open up.

STEP 12: On Add Setup, select the brand and model of your cutter matching the example below and press Next.

IMPORTANT: If USCutter is NOT in the list of Brand Name. Download and install the Flexi Driver Packs.


* * * * * * * * * * * * * * * * * * * * * * * * * * * *

STEP 13: Select the COM? number that was assigned to the cutter, then press Finish.

STEP 14: To cut your design Press the Send button on the Cut/Plot screen.

IMPORTANT: If you have had any problems with this guide and need help or if you would just like to send us feed back on this guide please click the Live Support icon to enter into a chat with our support staff.

Enjoy your new vinyl cutter! Thank you for choosing USCutter