LASERPOINT  |  MAC OS X  |  SIGNCUT  |  NO KEYSPAN ADAPTER?  |  ESPAÑOL  




LASERPOINT SETUP GUIDE WITH KEYSPAN
FOR MAC OS X




IMPORTANT: In order to use this cutter with a Mac Computer you need a USB to Serial adapter; we recommend the KeySpan adapter made by TrippLite. 
This device is available on our website. Click here for more information.

PARTS REQUIRED FOR THE CONNECTION:

                                                                                                - Power Cable (included with cutter)
                                                                                                - USB Cable (Included with cutter)
                                                                                                - Serial Cable (included with cutter)
                                                                                                - KeySpan Adapter (sold separately)




KEYSPAN ADAPTER DRIVER INSTALLATION

STEP 1: You can install the KeySpan Adapter driver using the CD included, but we highly recommend downloading the most recent driver linked below.

IMPORTANT: Make sure the KeySpan serial adapter is NOT plugged into your Mac, download the driver and select the version of OS X accordingly.


* * * * DOWNLOAD REQUIRED USB DRIVER * * * *



* * * * * * * * * * * * * * * * * * * * * * * * * * * *

STEP 2: Locate the KEYSPAN_OS_X.dmg file just downloaded and double click to open.



STEP 3: You will see three files, select based on your OS X version.



STEP 4: Once the file runs the Setup Assistant will display, select Continue.



STEP 5: The Software Information “Read Me” will display, select Continue.



STEP 6: The Software License Agreement will display, select Continue.



STEP 7: Click Agree.



STEP 8: Select Install.



STEP 9: Enter your user information to allow the installation and press OK.



STEP 10: Installing the KeySpan driver...





NOTE: The following message will display notifying the driver was successfully installed. Press Close.



NOTE: To finish the installation is recommended to Restart your Mac.


KEYSPAN ADAPTER CONNECTION SETUP

STEP 11: Turn the cutter ON and connect the Serial Cable to the Serial Port of the cutter.




STEP 12: Connect the Serial and USB Cable to the KeySpan Adapter as shown below.



STEP 13: Connect the USB cable to your Mac.



STEP 14: Install the Cutting Software.


* * * * * * * CUTTING SOFTWARE SETUP AND INSTALLATION * * * * * * *
CLICK THE ICON FOR THE SOFTWARE YOU ARE USING TO CONTINUE SETUP





IMPORTANT: If you have had any problems with this guide and need help or if you would just like to send us feed back on this guide please click the Live Support icon to enter into a chat with our support staff.


Enjoy your new vinyl cutter! Thank you for choosing USCutter