COPAM | WINDOWS XP | SIGNCUT | FLEXI 10 | SIGNBLAZER | ESPAÑOL
CUTTING SOFTWARE INSTALLATION
* * * * * ALREADY INSTALLED FLEXI 10? CLICK HERE FOR THE CUTTER SETUP INFORMATION * * * * *
STEP 1: Insert the Flexi 10 Disc into your computer.
STEP 2: Choose the setup language and press OK.
STEP 3: The Welcome to the InstallShield Wizard for SAi Production Suite screen will appear, press Next.
STEP 4: Read the License Agreement, select I accept the terms of the license agreement and press Next.
STEP 5: Select the features and press Next.
STEP 6: Press Next.
IMPORTANT: Unplug the USB Dongle if you get this error message and press OK.
NOTE: Installing the USB Dongle driver...
STEP 7: Connect the USB Dongle and locate the password on a piece of paper included with the software package.
STEP 8: Enter the Password, and press Done.
IMPORTANT: If the password provided doesn’t work this error message will be displayed.
NOTE: Please contact us if the password provided doesn’t work.
STEP 9: Press OK.
STEP 10: Installation completed, press Finish.
STEP 11: Open FlexiSTARTER 10 and press the Cut/Plot button. (Type some text or design something so this button becomes available).
NOTE: The Cut/Plot, the Production Manager and the Add Setup screens will open up.
STEP 12: On Add Setup, select the brand and model of your cutter matching the example below and press Next.
IMPORTANT: If USCutter is NOT in the list of Brand Name. Download and install the Flexi Driver Packs.
* * * * DOWNLOAD FLEXI DRIVER PACKS * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * *
STEP 13: Select the COM? number that was assigned to the cutter, then press Finish.
STEP 14: To cut your design Press the Send button on the Cut/Plot screen.