ZENCUT  |  WINDOWS 7  |  SIGNCUT  |  FLEXI 10  |  SIGNBLAZER  |  TROUBLESHOOTING




ALTERNATIVE INSTALLATION
DRIVER INSTALLATION FAILS AFTER CONNECTING THE CUTTER TO THE COMPUTER


NOTE: If the driver does not install or the installation fails, follow these steps:



STEP 1: Open the Device Manager.

To access Device Manager, use any of the following methods:
  1. Start > Control Panel > System and Security > System > Device Manager
  2. Start > Control Panel > Device Manager or System
  3. Start > Run > and type: devmgmt.msc
  4. Start > and do a Search for Device Manager or dev
  5. Right click the My Computer icon > Properties > Device Manager
  6. Hold the Windows key + Pause Break on your keyboard
STEP 2: Locate Other Devices and double click on USB-PRINTER.


STEP 3: The USB-PRINTER properties will display. Select the Driver tab and click the Update Driver button.


STEP 4:
Select Search automatically for updated driver software.


NOTE: Installing drivers...


STEP 5: The following message may appear during the driver installation, select Install this driver software Anyway.


STEP 6: Cutter driver successfully installed, press Close.


STEP 7: The updated properties will be displayed, select Close.


NOTE: Now follow Step 8 on the Cutting Software Guide.


* * * * * * * CUTTING SOFTWARE INSTALLATION AND SETUP * * * * * * *

CLICK THE ICON FOR THE SOFTWARE YOU ARE USING TO CONTINUE SETUP

 

 


 


Enjoy your new vinyl cutter!  Thank you for choosing USCutter