TC SERIES  |  WINDOWS VISTA  |  SIGNCUT  |  FLEXI 10  |  TROUBLESHOOTING




ALTERNATIVE INSTALLATION
UPDATE DRIVER SOFTWARE DOES NOT DISPLAY WHEN CONNECTING THE CUTTER


NOTE: If the driver does not install or the installation fails after connecting the cutter via USB and powering on, follow these steps:


IMPORTANT: In order to follow this instructions make sure that the TC_Series Driver folder from the TC_Series Driver.exe file has been extracted.

STEP 1: Open the Device Manager.

To access Device Manager, use any of the following methods:
  1. Start > Control Panel > System and Security > System > Device Manager
  2. Start > Control Panel > Device Manager or System
  3. Start > Run > and type: devmgmt.msc
  4. Start > and do a Search for Device Manager or dev
  5. Right click the My Computer icon > Properties > Device Manager
  6. Hold the Windows key + Pause Break on your keyboard
STEP 2: Locate Other Devices and double click on CDC RS-232 Emulation Demo.


STEP 3: The CDC RS-232 Emulation Demo properties will display. Select the Driver tab and click the Update Driver button.


STEP 4: The Update Driver Software will display, now follow Step 7 on the Installation Guide.


* * * * * * * CUTTING SOFTWARE INSTALLATION AND SETUP * * * * * * *

CLICK THE ICON FOR THE SOFTWARE YOU ARE USING TO CONTINUE SETUP

 

 



Enjoy your new vinyl cutter!  Thank you for choosing USCutter