TC SERIES | WINDOWS 7 | SIGNCUT | FLEXI 10 | TROUBLESHOOTING
UPDATE DRIVER SOFTWARE DOES NOT DISPLAY WHEN CONNECTING THE CUTTER
NOTE: If the driver does not install or the installation fails after connecting the cutter via USB and powering on, follow these steps:
IMPORTANT: In order to follow this instructions make sure that the TC_Series Driver folder from the TC_Series Driver.exe file has been extracted.
STEP 1: Open the Device Manager.
To access Device Manager, use any of the following methods:
STEP 3: The CDC RS-232 properties will display. Select the Driver tab and click the Update Driver button.
STEP 4: The Update Driver Software will display, now follow the Step 7 on the Installation Guide.
* * * * * * * CUTTING SOFTWARE INSTALLATION AND SETUP * * * * * * *
CLICK THE ICON FOR THE SOFTWARE YOU ARE USING TO CONTINUE SETUP
Enjoy your new vinyl cutter! Thank you for choosing USCutter